ST STM32F31xx

General-purpose timers (TIM)
UM1581
474/584
DocID023800 Rev 1
 TIM_ForcedAction : specifies the forced Action to be set to
the output waveform. This parameter can be one of the
following values:
 TIM_ForcedAction_Active : Force active level on
OC4REF
 TIM_ForcedAction_InActive : Force inactive level on
OC4REF.
Return values
 None.
Notes
 None.
22.2.12.22 TIM_ForcedOC5Config
Function Name
void TIM_ForcedOC5Config ( TIM_TypeDef * TIMx, uint16_t
TIM_ForcedAction)
Function Description
Forces the TIMx output 5 waveform to active or inactive level.
Parameters
 TIMx : where x can be 1 or 8 to select the TIM peripheral.
 TIM_ForcedAction : specifies the forced Action to be set to
the output waveform. This parameter can be one of the
following values:
 TIM_ForcedAction_Active : Force active level on
OC5REF
 TIM_ForcedAction_InActive : Force inactive level on
OC5REF.
Return values
 None.
Notes
 None.
22.2.12.23 TIM_ForcedOC6Config
Function Name
void TIM_ForcedOC6Config ( TIM_TypeDef * TIMx, uint16_t
TIM_ForcedAction)
Function Description
Forces the TIMx output 6 waveform to active or inactive level.
Parameters
 TIMx : where x can be 1 or 8 to select the TIM peripheral.
 TIM_ForcedAction : specifies the forced Action to be set to
the output waveform. This parameter can be one of the
following values:
 TIM_ForcedAction_Active : Force active level on