ADCx : where x can be 1, 2, 3 or 4 to select the ADC
peripheral.
ADC_FLAG : specifies the master or slave flag to clear. This
parameter can be one of the following values:
ADC_FLAG_MSTRDY : ADC master Ready (ADRDY)
flag
ADC_FLAG_MSTEOSMP : ADC master End of
Sampling flag
ADC_FLAG_MSTEOC : ADC master End of Regular
Conversion flag
ADC_FLAG_MSTEOS : ADC master End of Regular
sequence of Conversions flag
ADC_FLAG_MSTOVR : ADC master overrun flag
ADC_FLAG_MSTJEOC : ADC master End of Injected
Conversion flag
ADC_FLAG_MSTJEOS : ADC master End of Injected
sequence of Conversions flag
ADC_FLAG_MSTAWD1 : ADC master Analog
watchdog 1 flag
ADC_FLAG_MSTAWD2 : ADC master Analog
watchdog 2 flag
ADC_FLAG_MSTAWD3 : ADC master Analog
watchdog 3 flag
ADC_FLAG_MSTJQOVF : ADC master Injected
Context Queue Overflow flag
ADC_FLAG_SLVRDY : ADC slave Ready (ADRDY)
flag
ADC_FLAG_SLVEOSMP : ADC slave End of Sampling
flag
ADC_FLAG_SLVEOC : ADC slave End of Regular
Conversion flag
ADC_FLAG_SLVEOS : ADC slave End of Regular
sequence of Conversions flag
ADC_FLAG_SLVOVR : ADC slave overrun flag
ADC_FLAG_SLVJEOC : ADC slave End of Injected
Conversion flag
ADC_FLAG_SLVJEOS : ADC slave End of Injected
sequence of Conversions flag
ADC_FLAG_SLVAWD1 : ADC slave Analog watchdog
1 flag
ADC_FLAG_SLVAWD2 : ADC slave Analog watchdog
2 flag
ADC_FLAG_SLVAWD3 : ADC slave Analog watchdog
3 flag
ADC_FLAG_SLVJQOVF : ADC slave Injected Context
Queue Overflow flag
To Next Page
Loading...
