STEMME S12

DOCUMENT NUMBER:
L500-912.820 ISSUE JUL 20, 2016
AMENDMENT: 00
DATE: 
APPROVED SECTIONPAGE 44
MAINTENANCE MANUAL STEMME S12
NOTES
1. Overhauls of STEMME–manufactured components may only be performed in accordance
with manufacturer–approved data.
2.
Under extreme environmental conditions (hot, dusty) greasing of the propeller blade
bearings as part of the overhaul can be required more frequently if indicated during
Annual Inspection.
3.
Dierent Overhaul and Replacement intervals in the variable pitch propeller assy. are,
dened for specic individual mechanical components. Respective components are sorted
by their applicable TBO/TBR.
4.
If the limitation is given in engine operating hours and in a calendar period, the rst
occurring case applies for the aected components.
5.
Even under ideal conditions, replacement or overhaul of parts or components may be
required before attaining the chapter 4 Life Limits. Even life–limited parts are subject to
“on–condition” inspection before reaching TBO intervals.