STEMME S12 User Manual

DOCUMENT NUMBER:
L500-912.820 ISSUE JUL 20, 2016
AMENDMENT: 00
DATE: 
CHAPTERPAGE 514
MAINTENANCE MANUAL STEMME S12
5.3.6 INSPECTION GROUPS AND MAINTENANCE CRITERIA
VISUAL INSPECTION
When called for in conjunction with an inspection task, or at any time that an area is visible
during an inspection or maintenance action, the following visual inspection criteria shall be
accomplished without requiring disassembly or removal of adjacent equipment unless otherwise
specied or indicated.
The criteria will normally apply to those areas, surfaces, or items made visible by the removal or
opening of access panels, fairings, or cowlings. The visual inspection shall include an examination
by area, component, detail, assembly, or installation, as well as any associated equipment within
the immediate vicinity, using any inspection aids considered necessary.
When performing either an Annual or a 100 hr Inspection, each installed miscellaneous item not
specically covered in Section 5.1 or in section 5.4 Checklist for Periodic Maintenance, shall
also be inspected for proper installation and proper operation:
NOTICE
In addition to the inspections, you should carefully inspect the following categories of parts. All
Chapter 5 references to performance of maintenance inspections are to be understood as refer-
ences to the following criteria for visual inspection of such parts.
Visual inspection criteria will normally consist of but are not limited to the following criteria:
• Moving Parts:
Proper operation,
correct alignment,
securely installed,
sealing,
cleanliness,
lubrication,
adjustment,
tension,
travel,
condition,
binding,
excessive wear,
cracking,
corrosion,
deformation, and
any other apparent damage.
• Composite Parts:
Securely installed,
condition,
cleanliness,
separation of bond,
indications of delamination,

STEMME S12 Specifications

General

Brand	STEMME
Model	S12
Category	Aircrafts
Language	English