STEMME S12

DOCUMENT NUMBER:
L500-912.820 ISSUE JUL 20, 2016
AMENDMENT: 00
DATE: 
CHAPTERPAGE 515
MAINTENANCE MANUAL STEMME S12
wear,
cracking,
obstruction of drainage or vent holes,
deformation,
signs of overheating, uid saturation and
any other apparent damage.
• Metal Parts:
Securely installed,
condition of nish,
cleanliness,
distortion,
fatigue cracks,
welding cracks,
corrosion, and
any other apparent damage.
• Fuel, Air, Oil, Coolant and Hydraulic Fluid Lines and Hoses:
Leaks,
cracks,
dents,
kinks,
loss of exibility,
sign of deterioration,
obstruction,
chang,
improper bend radius,
cleanliness,
securely installed, and
any other apparent damage
• Electrical Wiring:
Cleanliness,
loose, corroded or broken terminals,
chafed, broken or worn insulation,
wires and wire bundles securely installed,
signs of heat deterioration, and
any other apparent damage.
• Bolts and Nuts:
Fretting,
wear,
damage,
stretch,
cross–threading,
proper torque,
corrosion, and
locking or safety wiring.