STEMME S12 User Manual

DOCUMENT NUMBER:
L500-912.820 ISSUE JUL 20, 2016
AMENDMENT: 00
DATE: 
CHAPTERPAGE 729
MAINTENANCE MANUAL STEMME S12
7.4.8.2 FIRE PROTECTIVE SLEEVES
The re protective sleeves must be checked for condition and complete cover of the uid lines.
Check routing, especially for kinks in re protective sleeves, which might obstruct uid ow in
uid lines covered.
7.4.8.3 FIREWALL
• Check condition (deformation, cracks) of rewall sheets, their connection to each other
and to the center steel frame.
•
Check sheathing edges and renew if required. Look for chang from rewall edges on
fuselage steel frame, cables, hoses etc.
• Check fastening of penetration ttings of oil lines.
7.4.9 COWLINGS
System Description: See section 3.4.9
CAM LOCK FITTINGS, GENERAL
• Check condition, tight t and function of camlock fasteners on upper center fuselage
fairing and engine cowlings.
• Check tight connection of camlock ttings in the composite structure of fairing/cowling
and counterparts in fuselage.
UPPER CENTRE FUSELAGE FAIRING
• Check condition and proper t of the upper fuselage fairing.
• Check condition, function and tight attachment of oil service access door.
ENGINE COWLINGS
• Check condition and proper t of the LH and RH and lower engine cowlings.
• Check condition of air ducts and proper t to oil cooler, intercooler and radiator.
•
Check t and sealing to composite sealing plate of air induction and rubber seals on
coupling sheet of cylinder cooling air hose. Look for marks from chang between ducts
and engine components or rewall.

STEMME S12 Specifications

General

Brand	STEMME
Model	S12
Category	Aircrafts
Language	English