STEMME S12 User Manual

DOCUMENT NUMBER:
L500-912.820 ISSUE JUL 20, 2016
AMENDMENT: 00
DATE: 
CHAPTERPAGE 519
MAINTENANCE MANUAL STEMME S12
5.4 CHECK LIST FOR PERIODIC INSPECTIONS
WARNING
Switch OFF Master-Switch and Ignition for any maintenance work!
NOTICE
Read maintenance instructions in sections 6 and 7 before carrying out adjustments!
Additionally to maintenance instructions, these sections indicate special maintenance intervals
(2 years) allowable for some items of the Annual inspection program in the following check list.
For explanation of type of inspection refer to section 5.3.1 and 5.3.4.
5.4.1 GENERAL
Type and Subject of Inspection
Break-in Aircraft 100 hr Engine 100 hr Engine 200 hr Engine 600 hr Annual
Refer to
Section
Sign-o
1. Thoroughly clean aircraft and
engine, remove or open all
necessary inspection plates,
access doors, fairings and
cowlings.
X X X
-
2. Inspect aircraft surfaces and
markings (especially registra-
tion and national ag), renew
if necessary.
X X X
6.6, 7.1
3. Check all drain and ventilation
holes (see position plan sec-
tion 6.7).
X X X
6.7
4. Check all points of lubrication
and grease if required (ref. to
section 6.5)
X X X
6.5
5. Check function of ight con-
trols.
X X X
7.3
6. Check slackness / free play of
aileron (outer wing and wing
extension), ap and elevator
controls.
X X
6.4.3
7. Check friction and forces in
control system.
X
6.4.1

STEMME S12 Specifications

General

Brand	STEMME
Model	S12
Category	Aircrafts
Language	English