i
764333-767
© 2009, STERIS Corporation All rights reserved. Printed in U.S.A.
A Word From STERIS Corporation
Thank you for choosing this fine STERIS product. STERIS
is committed to ensuring your continued satisfaction.
This manual illustrates and identifies assemblies and
components of the STERIS 4085 General Surgical Table.
All personnel involved in the use and maintenance of
this equipment must carefully review and comply
with the S
AFETY PRECAUTIONS and instructions
contained in the Maintenance Instructions (P764333-
766). Do not begin service of this Surgical Table until
you have become familiar with this information.
GENERAL
Assemblies and components of the STERIS 4085
General Surgical Table are illustrated and identified on
the following pages. The part number, the description
and the quantity required for each usage are given. Each
indentation in the description represents the assembly
level. The UNITS PER ASSEMBLY column is specific
for the given assembly or subassembly level.
HOW TO USE THE ILLUSTRATED PARTS
BREAKDOWN
1. Determine the function and application of the part
required. Examine the list of illustrations and select
the most appropriate title. Note the illustration page
number.
2. Turn to the page indicated and locate the desired part
on the illustration (see Example 1).
3. From the illustration, obtain the item number
assigned to the part desired. Refer to the
accompanying description for specific information
regarding the part (see Example 1).
4. The abbreviation A/R means “As Required” or
“Amount Required.”
5. The abbreviation SS means “Stainless Steel.”
SPECIAL INSTRUCTIONS
Table 1 provides part numbers and figure references
for the most commonly replaced items on a STERIS 4085
General Surgical Table and Table 2 does the same for
the hydraulics assembly. These tables are for quick
reference only. For a complete listing of parts, refer to
the appropriate Figure and associated Illustrated Parts
Breakdown (IPB) in this Section of the maintenance
manual.
Table 3 provides the part numbers, descriptions and
locations of the various labels supplied on this table.
Table 4 provides part numbers and descriptions of the
hardware not shown in the individual illustrations.
IMPORTANT:
A listing of the
SAFETY PRECAUTIONS
to be observed when operating and servicing this
equipment can be found in
SECTION 1
of
the Maintenance Instructions (P764333-766)
. Do not operate
or service the equipment until you have been trained on this information
.
WARNING – PERSONAL INJURY AND/OR
EQUIPMENT DAMAGE HAZARD: Repairs
and adjustments to this equipment must be
made only by STERIS or STERIS-trained service
personnel. Maintenance performed by
unqualified personnel or installation of
unauthorized parts could cause personal injury,
result in improper equipment performance,
invalidate the warranty, or result in costly
damage. Contact STERIS regarding service
options.
CAUTION – POSSIBLE EQUIPMENT
DAMAGE: To prevent voiding the warranty
or damaging the equipment, use only STERIS
replacement parts.
To Next Page
