Steris 4085 - Page 42

4-9
Operating Instructions Operator Manual 150832-639
been reached and table automatically stops and locks in position.
Refer to S
ECTION 2.5.2, RANGE OF MOTION, for the positioning of the
following table functions.
SLIDE HEAD:
When depressed, Zip-Slide moves tabletop toward
head end. When slide returns to central ("0") position, movement stops
for one second before continuing. Function powered by battery.
SLIDE FOOT: When depressed, Zip-Slide moves tabletop toward
foot end. When slide returns to central ("0") position, movement stops
for one second before continuing. Function powered by battery.
HEIGHT UP: When depressed and pumping simultaneously, the
entire tabletop raises.
HEIGHT DN: When depressed and pumping simultaneously, the
entire tabletop lowers.
TREND: When depressed and pumping simultaneously, the head
end of the tabletop lowers; or, foot end raises.
REVERSE TREND: When depressed and pumping simultaneously,
the head end of the tabletop raises; or, foot end lowers.
TILT LEFT: When depressed and pumping simultaneously, the
tabletop rolls to the left (patient's left or viewing the table from the
head end).
TILT RIGHT: When depressed and pumping simultaneously, the
tabletop rolls to the right (patient's right or viewing the table from the
head end).
BACK UP: When depressed and pumping simultaneously, the
tabletop back section raises.
BACK DN: When depressed and pumping simultaneously, the
tabletop back section lowers.
LEG UP: When depressed and pumping simultaneously, the
tabletop leg section raises.
LEG DN: When depressed and pumping simultaneously, the
tabletop leg section lowers.
KIDNEY UP: When depressed and pumping simultaneously, the
tabletop KIDNEY Elevator raises to the maximum 4" (110 mm).
KIDNEY DN: When depressed and pumping, the tabletop Kidney
Elevator Mechanism lowers.
FLOOR LOCK: When depressed and pumping simultaneously, floor
locks are slowly lowered. To ensure table is correctly secured to the
floor, gently push on table.
FLOOR UNLOCK: When depressed, floor locks are slowly released.
To ensure floor locks are completely disengaged, gently push on
table.
NOTE: When table is in the Backup FLOOR UNLOCK configuration,
tabletop functioning IS active. FLOOR LOCK table before moving
tabletop.
STOP: When depressed, all hand control function buttons
deactivate. All functions are stopped immediately.