Stiegelmeyer Libra User Manual (English)

Questions and Answers:

J
James PittmanSep 6, 2025
What causes a Stiegelmeyer Libra Indoor Furnishing control unit to malfunction partially?
- S
  Suzanne PowellSep 7, 2025
  If the control unit of your Stiegelmeyer Indoor Furnishing is partly not functioning, it may be due to motors not being connected properly or electrical plug connections coming loose. Check the electrical connections of all motors and plug connections. It could also indicate a serious problem with the control unit, causing all functions to lock for safety reasons. In this case, perform a RESET. If the issue persists, have the drive system checked.
C
Cheryl TerrellSep 8, 2025
What to do if Stiegelmeyer Indoor Furnishing operation is not possible despite proper power supply?
- R
  Ronald ThomasSep 8, 2025
  If your Stiegelmeyer Indoor Furnishing isn't working even with a proper power supply, it might be due to: * The control unit shutting down from overheating. Observe the maximum duty cycle: intermittent duty 2 minutes ON/18 minutes OFF; consider replacing the control unit. * The control unit detecting a fault and locking the adjusting functions for safety. Unplug the transformer unit from the outlet, wait at least 10 seconds, and then plug it back in. * A defective control unit. Exchange the control unit and inform your operator about any necessary repairs.
K
Kimberly MurphySep 10, 2025
Why Stiegelmeyer Indoor Furnishing drive runs for a brief time only, then stops?
- W
  Warren RobinsonSep 10, 2025
  If the drive of your Stiegelmeyer Indoor Furnishing runs briefly and then stops, it could be due to: * The drive being overloaded. Remove the overload from the bed and retest. * Structural obstructions hindering bed adjustment. Remove any obstructions and move the bed away from things like window sills or sloping roofs.
M
Mrs. Jenny Hughes MDSep 12, 2025
What to do if green LED on Stiegelmeyer Indoor Furnishing transformer unit does not light up?
- Y
  Yolanda PinedaSep 12, 2025
  If the green LED on the transformer unit of your Stiegelmeyer Indoor Furnishing doesn't light up and the drive system isn't working, check these: * Ensure the transformer unit is properly plugged in. * Verify that the socket has power. Check the socket itself. * The transformer unit may be damaged. Replace the transformer and inform your operator about necessary repairs.
K
Kimberly WiseSep 13, 2025
What to do if Stiegelmeyer Indoor Furnishing control unit partly not functioning?
- D
  David SmithSep 13, 2025
  If the control unit of your Stiegelmeyer Indoor Furnishing is only partly functioning: * Check if one or more motors are not connected or if electrical plug connections are disconnected. Check the electrical connection and all motors/plug-in connections and have the actuator system checked. Inform the operator in order to arrange for repairs. * A serious error may have occurred in the control unit, blocking all functions for safety reasons. Inform the operator in order to arrange for repairs.