Special equipment 7
Leaning cushion
tilt barrier is locked. It is unlocked again if the
foot switch is briefly actuated once and the
remaining conditions are fulfilled for it to be
unlocked.
Leaning cushion
When driving in the load direction, the operator
is able to lean on this cushion. By doing so, the
operator can adopt an ergonomic position.
Adjustment
The cushion can be latched
into four positions.
– Using both hands, pull out the leaning
cushion on the metal bracket against the
spring force.
– Latch the leaning cushion back into the
required position.
Height-adjustable operating
panel
To ensure optimum ergonomics for the
operator in going about their work, the height
of the operating panel can be electrically
adjusted. The adjustment range is 130 mm.
WARNING
Risk of crushing hands
When adjusting the height of the operating panel,
the operator must keep a firm grip of the handhold
with their right hand.
WARNING
Risk of accident
Only adjust the operating panel when the truck is at
a standstill
Height adjustment
Push the rocker switch (1) up to raise and
down to lower.
52
13 804 2501 EN - 01/2016 107
To Next Page
Loading...
