Safety 2
Narrow aisle vehicles
Engineering Federation) and therefore need
to be converted and retrofitted, please note
that any structural modification may impair
the performance and stability of the indus-
trial trucks and can result in accidents. It is
therefore not permitted to make such changes
without our approval
Add-on parts and modifications (e.g. the weld-
ing-on of parts or the creation of openings)
could weaken the supporting structure and are
therefore only permitted after acceptance by
our design department. Functional changes
through modifications to the electrical system
or the software also require our acceptance
and release.
Before any such work is done
you should
therefore make contact wit
h the branch office
or the specialist represen
tative in your area.
Narrow aisle vehicles
Narrow aisle vehicles
may only be operated in
narrow aisles in accor
dance with the intended
use, if suitable preca
utions have been taken
(e.g. mobile or statio
nary protective equip-
ment to EN 2006/42/EG a
nd EN ISO 13849)
which prevent the poss
ibility of collisions oc-
curring between perso
ns and vehicles, or
which prevent persons
and other vehicles also
being present at that
time.
In Europe it is the owner’s responsibility to
ensure that EU guidelines and stipulations are
complied with. The owner must conduct a risk
analysis to prove that adequate protection is
provided. On the basis of our experience, we
offer to support the owner in this task.
Original parts
Our original parts and accessories are spe-
cially designed for our vehicles. We would
specifically point out that parts and acces-
sories not supplied by us have also not been
tested and approved by us. The incorporation
and/or use of such products can consequently
adversely affect the structurally predeter-
mined properties of your vehicle and thus
52
13 804 2501 EN - 01/2016 21
To Next Page
Loading...
