4 Operation
Parking, decommissioning
It is the operator’s duty to remove the ignition
key when he leaves the truck, thus securing
the truck against unauthorised use. If the
truck is equipped with an electronic access
control, it must be reset and/or the device for
controlling access must be removed. Where
possible, the truck should be parked at the
start of a racking aisle or in a loading bay. If
there are parking spaces, the truck must be
parked there. The fork is to be lowered to the
floor as far as possible, and if there is one, the
tilt attachment must tilt towards the floor to
reduce the risk of stumbling.
Decommissioning
ENVIRONMENT NOTE
If the truck described here has to be decom-
missioned, pay attention to ensure that all
components are disposed of in accordance
with the locally applicable regulations. Oper-
ating media used must be sent for recycling
and/or correct disposal.
70
5213 804 2501 EN - 01/2016
To Next Page
Loading...
Need help?
General
