4 Operation
General commissioning
as standard for normal lead wet batteries
(PzS). If a different battery type is used, the
battery discharge display must the reset. For
details, see Battery discharge display, setting
process
Commissioning the battery
CAUTION
Danger of accidents
Before starting work, always check that optional
battery latch is in perfect working order.
CAUTION
Danger of short circuits
Ensure that the battery cable is not crushed or
trapped.
Before first using the battery, correctly exe-
cuted commissioning is imperative. If the bat-
tery was procured separately from the truck,
pay particular attention to checking the rated
voltage, the required minimum weight and the
mounted battery plug. This is particularly im-
portant if the batteries have been loaded and
delivered dry due to long transportation dis-
tances (e.g. from overseas). Always precisely
observe the instructions and regulations of the
battery manufacturer.
If your truck is equipped with the Euro battery
plug, ensure the correct position of the voltage
index pin. It is possible to read off the set
voltage level through a viewing window (1).
46
5213 804 2501 EN - 01/2016
To Next Page
Loading...
