EasyManua.ls Logo

Still EK-X - Transporting and Loading

Still EK-X
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation 4
General commissioning
Transporting and loading
ENVIRONMENT NOTE
Hydraulic oil can escape through discon-
nected hydraulic connections.
Depending on the overall h
eight, the truck can
be delivered as a complete
unit or unassem-
bled. In each case, the wei
ghts of the compo-
nents or the complete unit
must be determined
(delivery papers) and sui
table hoists and har-
nesses must be available.
Hooking on
NOTE
We always recommend the use of textile
straps so as to protect the paintwork of your
truck. Shims may be required to protect the
harnesses from sharp edges.
The lifting points for the chassis are located on
the right and left in the area of the load wheels,
as well as in the chassis area next to the drive
unit. The lifting points are indicated by the
pictogram opposite.
NOTE
The chassis is always mechanically braked
unless the truck is put into operation.
52
13 804 2501 EN - 01/2016 41

Table of Contents

Related product manuals