3 Overview
Truck description
Truck description
You can find information about how to operate
the individual functions in the corresponding
chapters.
General
This order picker is available in a wide range
of variants:
• Without auxiliary lift
• With auxiliary lift
• With mechanical guidance
• With inductive guidance
• Without guidance system
The driver can raise himself and the lifting
accessory to the required working height by
raising the driver’s cab.
The auxiliary lift* may b
e used to adjust to a
suitable shelf height wh
en performing order
picking tasks. When tran
sporting loads, the
auxiliary lift* must al
ways be lowered to such
a height that the load is
clear of the ground
during transportation
.
In very narrow aisles, the order pickers are
guided either mechanically or inductively (see
section entitled "Special equipment").
If the aisles are wide enough, the trucks can
be driven freely with the load lowered. All
movements (driving, lifting/lowering cab
lift, lifting/lowering auxiliary lift) are infinitely
adjustable.
Operating errors can
be prevented to a large
extent by means of saf
ety circuits. For lift
heights where the floo
r of the driver’s cab is up
to a height of 1.2 m (d
riven freely or guided),
the cab barriers may
be left open when the
truck is being drive
n. If the truck is driven at
a lift height of grea
ter than 1.2 m, the barriers
must be closed.
A symbol in the display informs the operator of
this requirement.
*Option
30
5213 804 2501 EN - 01/2016
To Next Page
Loading...
