Operation 4
Load pick-up
1 continuously vari
able lowering
2 continuously var
iable lifting
Load pick-up without guidance
Order pickers are mainly intended for collect-
ing or distributing goods in a container or on a
pallet. When transporting loads, the auxiliary
lift* must always be lowered.
DANGER
Risk of tipping in the load direction
During picking work, goods for transport, and
therefore weight, accumulates on the load support.
Because picking is a manual process, the truck
control unit cannot monitor it and therefore also
cannot warn of overloading. The operator must
ensure that the load capacity of the order picker is
not exceeded during picking work.
DANGER
Riskoftippingtotheside
Under no circumstances must the truck be driven
round corners with a load raised further than just
clear of the ground. At greater heights, only positio-
ning movements at creep speed are permitted. The
steering must be in a straight-ahead position.
*Option
Actuate the right or left control rocker and step-
lessly raise or lower the driver’s compartment.
3 Auxiliary lift selection button
Auxiliary lift
Press button (3) and then actuate control
rocker using (1) for lowering or (2) for raising.
52
13 804 2501 EN - 01/2016 67
To Next Page
Loading...
