Maintenance 5
General maintenance information
General maintenance
information
WARNING
– Appropriate precautions for safe working must
be taken for all maintenance work.
– As well as the usual occupational safety regula-
tions, the safety information specifically outlined
in this brochure must also be adhered to.
– Whenever you are working on the hydraulic
system, ensure that the entire system is de-
pressurised. This is particularly important when
working on trucks with built-in accumulators.
– Unplug the battery male connector before
carrying out any maintenance work (except
functional tests).
– Only electricians from the appropriate service
station may carry out work on the electrical
system.
To ensure the safe operation of your industrial
truck over a long period of time, it is absolutely
essential that you carry out thorough mainte-
nance in a correct manner at the prescribed
intervals. The maintenance work is described
in the maintenance schedule and must be car-
ried out by trained, specialist personnel. We
recommend that you use our original spare
parts, which can be found in the spare parts
list. The installation of other parts will invali-
date the warranty. Our dedicated service team
will assist you with any queries about care and
maintenance. We offer you the opportunity to
take out maintenance contracts with us and
can carry out regular testing for you.
Service frequencies and times
Maintenance is carried out at six-month
intervals. You can use the maintenance
schedule to determine what work is required.
The maintenance intervals must be reduced
for trucks exposed to high levels of dust and
significant temperature fluctuations. A check
of the function and condition of the truck
must be carried out during each maintenance
operation.
NOTE
52
13 804 2501 EN - 01/2016 83
To Next Page
Loading...
Need help?
General
