Overview 3
Labelling on special equipment
Labelling on special equipment
1 Truck with customised software. Only the
customer’s special version and not the
standard software may be installed in the
truck control unit.
2 Storage space for the fall protection device
3 Note on risk of falling
4 The industrial truck must not be operated if
a safety barrier closed on three sides is not
present
5 Lubricants suitable for cold store applica-
tions must be used (see lubricants for cold
store trucks).
6 Industrial truck with cold store equipment
7 This industrial truck must only be operated
by operators with the appropriate training.
8 Switch in "switched off" position
9 Switch in "automatic mode" position
The pictograms shown here replace the
pictograms for the standard version or are
fitted in addition to the standard pictograms.
52
13 804 2501 EN - 01/2016 29
To Next Page
Loading...
