Communication
Operation manual
ID 442233.05
WE KEEP THINGS MOVING
29
7
case (know-how protection) a partial reverse documentation can be read. The
following functions are available in this online mode.
• Parameter lists
• Fault memory indication
•Scope
• Simubox
• Free parameter list
When online mode is concluded with a partial reverse documentation, the data
record is marked as reverse documentation and parameter values can no longer
be changed. The data record cannot be converted in a configuration or
transferred again to the inverter.
Utilizing memory space
When the configuration is loaded, the memory requirements of the data record
are compared with existing memory space on the inverter. If it is certain that the
data record can be stored, POSITool does not give you a message. If the
expected memory utilization is 95 % or more, a message is indicated.
A memory utilization in this range occurs, for example, when you have defined too
many motion blocks and profiles in the motion block positioning application. Try
to optimize the configuration. Contact application@stoeber.de if you have
questions.
To Next Page
