7
Communication
ID 442233.05
WE KEEP THINGS MOVING
Operation manual
30
Second case: Identical configurations
When POSITool determines that the configurations are identical, the dialog
screen shown in appears. When this happens, you have the following choices:
• Load the parameters from POSITool to the inverter ( ) or
• Load the parameters from the inverter to POSITool ( )
Fig. 7-4 Establishing a connection for identical configurations
If you want to check the differences between the parameters in POSITool and the
inverter, press the Details button ( ). POSITool then indicates the differences in
a dialog screen in which the values of the parameters in POSITool and the inverter
are listed.
To Next Page
