Administration graphical interface
From your client workstation, type the following address in your browser:
https://10.0.0.254/admin
Enter "admin" as the login and password.
IMPORTANT
If you have connected your client workstation on port 1, you will no longer be able to
access the web administration interface You will need to connect your computer to port 2
(or on another port), and reboot your Firewall.
NOTE
The default password of the “admin” user (super administrator) must be changed the very
first time the product is used. In the web administration interface, this password can be
changed in the Administrator module (System menu), under the Administrator account
tab.
The definition of this password must observe the best practices described in the User
Guide, in the section Welcome, sub-section User awareness, paragraph User password
management, available at: https://documentation.stormshield.eu
This password must never be saved in the browser.
For further information on downloading and installing your license, refer to the section UPDATING
THE LICENSE.
Stormshield Network administration suite
The Stormshield Network Administration Suite, which contains the SN REALTIME
MONITOR program, can be downloaded from your Secure area.
Log on to the following address to access or obtain the access codes to your Secure
area: https://mystormshield.eu/
You can also obtain this suite at: http://gui.stormshield.eu/last-version
SNS - PRODUCT PRESENTATION AND INSTALLATION 2019
INITIAL CONNECTION TO THE PRODUCT
Page 50/66 sns-en-SNrange_installation_guide-2019 - 09/2019
To Next Page
Loading...
