Studer Innotec SA
next3
Technical user manual V1.3 © Studer-Innotec SA 49
5.6.2
Connection to Internet
The connection to your LAN and internet is done exclusively in the nx-interface on the Ethernet port.
In remote area, you can find your own GSM 3G/4G/5G router (not provided). Studer-Innotec is not
responsible for the proper operation of those devices and of your internet connection.
See the chapter “configurations” for the setup of the internet connections.
Differentiate carefully the ethernet connection with the two led on the low side of the connector.
The internet connection set up is described in the programming chapter of this manual.
To Next Page
Loading...
Need help?
General