Studer Innotec SA
next3
62 V 1.3 © Studer-Innotec SA next3 Tech manual
7.1.3
Accessibility
User accessibility: can be changed in the nx-interface menu with user levels.
The levels are:
• View Only: the user has access to levels 1 and 2 of the screens (dashboard, synoptic, graph,
messages, view of components information). The configuration icon is not accessible and
the user cannot change anything in the configuration of the system. Code is 00000.
• Basic: the user has accessed to the level 2 and 3 It is possible to modify the configuration of
the next without the full list of settings (the full list icon is not accessible). The important
settings for the standard operation of the next system are available on the prepared screens
of level 3. Code is 815566.
• Expert: the user has accessed to all information and settings. Access is restricted for end-user
as the grid code settings must be chosen by the qualified installer at commissioning and
modifications are not allowed. The expert code is delivered only to qualified installers.
On the first commissioning the nx-interface is set to Expert to allows the use of the wizard
process and then automatically set down to View Only.
The modification of the user level is
done with codes in the nx-interface, in
the remote control screen and then on
the configuration menu ( → )
The codes are beside:
To Next Page
Loading...
Need help?
General