Studer Innotec SA
next3
56 V 1.3 © Studer-Innotec SA next3 Tech manual
6.4 BEEP INDICATOR (BUZZER)
The sound produced by the next3 buzzer uses the same beep sequence as the central “!” red light
flashing sequence.
This buzzer can be deactivated/activated with the nx-interface
This buzzer can also be deactivated/activated with the ne[xt] button of the front panel. The button
must be pushed for 5 seconds < push < 7 seconds (release after the 3
rd
beep to toggle the function).
In any case, the sounds when pressing the button to identify the functions described on chapter 6.2
will remain active.
To Next Page
Loading...
Need help?
General