Studer NEXT3 User Manual

Studer Innotec SA
next3
Technical user manual V1.3 © Studer-Innotec SA 61
7.1.2 Embedded documentation
The nx-interface has an embedded documentation about all information (level 2) and
settings (level 3) available.
• Access to documentation about one setting/information by clicking on its name
• Change the settings by clicking on its value
The explanations about the received messages are also embedded by clicking on one
message.
The full list of information and settings with their default values, units, ranges and explanations
can be found in appendix at the end of this manual. The full list of messages is also in appendix
of this manual. The same documentation is embedded in the nx-interface.
Click on name:
Go to documentation
about the setting
Click on value:
Modifiy the setting value

Studer NEXT3 Specifications

General

Brand	Studer
Model	NEXT3
Category	Industrial Equipment
Language	English