70 Sun Fire X4170, X4270, and X4275 Servers Installation Guide • December 2009
8. Insert the left CMA slide-rail connector into the rail extension on the left slide-
rail assembly until the connector locks into place with an audible click (see
FIGURE 3-13).
FIGURE 3-13 Connecting the CMA to the Rail Extension Connector
9. Install and route cables to your server, as required.
Note – Instructions for installing the server cables are provided in “Connecting the
Cables” on page 74.
Figure Leg end
1 CMA extension arm (on left slide-rail)
2 CMA extension
To Next Page
Loading...
