2-52 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
4. Use the resetdateoffset(8) command to reset the time subtractions between
the domains with the XSCF.
5. Use the poweron(8) command to turn on power to all domains.
6. Use the showdateoffset(8) command to confirm no difference between the
XSCF time and the domain time.
XSCF> poweroff -a
DomainIDs to power off:00,01,02,03
Continue? [y|n] :y
00 : Powering off
01 : Powering off
02 : Powering off
03 : Powering off
*Note*
This command only issues the instruction to power-off.
The result of the instruction can be checked by the "showlogs
power".
XSCF>
XSCF> resetdateoffset
XSCF>
XSCF> poweron -a
DomainIDs to power on:00,01,02,03
Continue? [y|n] :y
00 :Powering on
01 :Powering on
02 :Powering on
03 :Powering on
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the "showlogs
power".
XSCF>
XSCF> showdateoffset -a
DID Domain Date Offset
00 0 sec
01 0 sec
02 0 sec
03 0 sec
To Next Page
Loading...
