1-24 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
TABLE 1-7 User Privilege Names and Descriptions
User privileg e Outline Description of Defined Contents
domainop@n Reference of the status of any
part of one entire domain_n
• Can refer to the status of any hardware mounted
in a domain_n.
• Can refer to the status of any part of a domain_n.
• Can refer to the information of all system boards
mounted.
domainmgr@n Power supply operations and
reference of the status of only
one domain_n
• Can power on, power off, and reboot a domain_n.
• Can refer to the status of any hardware mounted
in a domain_n.
• Can refer to the status of any part of a domain_n.
• Can refer to the information of all system boards
mounted.
domainadm@n Control of only one
domain_n
• Can operate all hardware mounted in a domain_n.
• Can refer to the status of any hardware mounted
in a domain_n.
• Can operate all of a domain.
• Can refer to the status of any part of a domain_n.
• Can refer to the information of all system boards
mounted.
platop Reference of the status of any
part of the entire system
• Can refer to the status of any part of the entire
server but cannot change it.
platadm Control of the entire system • Can operate all hardware in the system.
• Can configure all XSCF settings except the
useradm and auditadm privilege settings.
• Can add and delete hardware in a domain.
• Can do the power operation of a domain.
• Can refer to the status of any part of the entire
server.
useradm User account control • Can create, delete, invalidate, and validate user
accounts.
• Can change user passwords and password
profiles.
• Can change user privileges.
auditop Reference of the Audit status • Can refer to the XSCF access monitoring status
and monitoring methods.
To Next Page
Loading...
