B-1
APPENDIX
B
XSCF Log Information
This appendix explains the following XSCF log information that can be referenced
using the XSCF Shell showlogs(8) command on the XSCF console.
The log types that can be referenced by the showlogs(8) command are shown
below. See
TABLE 8-3 for an outline of each log, its size, and generation number.
■ XSCF Error Log
■ Power Log
■ Event Log
■ Monitor Message Log
■ Temperature and Humidity History Log
■ Console Log
■ Panic Log
■ IPL Log
B.1 XSCF Error Log
To reference the log related to a status notification or a fault information that
occurred in the server, use these two commands:
■ showlogs(8) error option
■ fmdump(8)
The showlogs(8) error option displays fault information in a format specific to the
platform. Conversely, the fmdump command displays fault information in a format
compatible with the Solaris OS. This latter command is provided for users who are
familiar with the Solaris OS. When the log is referenced by these two commands,
there is a difference in display format but little difference in the information. Use
these commands in the following cases:
To Next Page
Loading...
