Chapter 4 Operation of the Server 4-15
2. Use the poweron(8) command to turn on power to the specified domain.
4.4.4 Domain Power Off
■ Command operation
1. Use the showdomainstatus(8) command to check the power status of all
domains.
<Example 1> Turn on power to the specified domain.
XSCF> poweron -d 0
DomainIDs to power on:00
Continue? [y|n] :y
00 :Powering on
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the
"showlogs power".
<Example 2> Cancel domain power on in progress.
XSCF> poweron -d 0
DomainIDs to power on:00
Continue? [y|n] :n
XSCF>
XSCF> showdomainstatus -a
DID Domain Status
00 Running
01 Running
02 Running
03 Powered Off
To Next Page
Loading...
