Chapter 2 Setting Up XSCF 2-45
TABLE 2-7 Setting Time and Date
Item Description Shell Command Remarks
Display time
zone
Displays the time zone and Daylight Saving
Time information.
showtimezone
Time zone Sets the time zone and Daylight Saving
Time.
• Standard time zone
• Custom time zone and Daylight Saving
Time
For the abbreviations of time zone and the
name of Daylight Saving Time, specify the
alphabets of 3 letters or more. You can
specify it in the format which complies with
RFC2822.
settimezone The POSIX standard is
used for the time zone.
The setting time zone list
can be referred by
specifying "-a" option.
Display
system time
Displays the time and date of the XSCF by
the local time or the Coordinated Universal
Time (UTC).
showdate
Date and
time
Sets a date and time to a local time or UTC.
The specification format is as follows:
• yyyy.mm.dd-HH:MM:SS
• mmddHHMMyyyy.SS
yyyy: Year, mm: Month, dd: Day of the
month, HH: Hour (24-hour system),
MM: Minute, SS: Second
setdate The settings can be enabled
when all of the domains are
powered off.
XSCF reset is done after the
settings.
Display NTP
server
settings
Displays NTP server settings showntp Synchronization is also
checked.
NTP server Configures an NTP server for XSCF
network. (In this case, XSCF is an NTP
client.)
Specify the IP address or host name of an
NTP server.
You can synchronize with up to three NTP
servers.
setntp No default setting has been
specified.
When an NTP server is
registered, the existing
setting is deleted and
overwriting is performed
with the specified NTP
server.
If you specify a host name
for an NTP server, the
server name must be
resolvable by DNS server.
To Next Page
Loading...
Need help?
General
