2-46 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
Specifying a Time Zone
■ Command operation
1. Use the showtimezone(8) command to display the time zone.
2. Use the settimezone(8) command to set the system time. The platadm
privilege is required.
The set time zone takes effect after executing the command.
3. Use the showtimezone(8) command to confirm the setting.
Prefer Specifies/cancels “prefer” to an NTP server
for XSCF network.
If prefer is specified, the NTP server
specified first by setntp (8) command has
priority over the others.
setntp The default is prefer
specified.
Stratum
value
Specifies a stratum service for XSCF.
You can specify an integer from 1 to 15.
setntp The default stratum value
is 5.
Reset time
subtraction
Resets the time subtraction between the
XSCF and each domain, which is stored in
XSCF.
As a result, the time of each domain will be
set to the same time as the XSCF after
startup.
resetdateoffset The settings can be enabled
when all of the domains are
powered off.
Display time
subtraction
Displays the time subtraction between the
XSCF and each domain.
showdateoffset
XSCF> showtimezone -c tz
America/Chicago
<Example 1> Display the timezone list.
XSCF> settimezone -c settz -a
Africa/Abidjan
Africa/Accra
:
<Example 2> Set the timezone.
XSCF> settimezone -c settz -s Asia/Tokyo
Asia/Tokyo
TABLE 2-7 Setting Time and Date (Continued)
Item Description Shell Command Remarks
To Next Page
Loading...
Need help?
General
