Sun Microsystems Sun SPARC Enterprise M5000 User Manual

2-26 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
Note – All DSCP addresses must be in the same network subnet.
Specifying a Host Name for XSCF
■ Command operation
1. Use the showhostname(8) command to display host names.
2. Use the sethostname(8) command to specify a host name.
XSCF> showhostname -a
xscf#0: scf-hostname0.company.com
xscf#1: scf-hostname1.company.com
<Example 1> Specify the host name scf0-hostname for XSCFU#0.
XSCF> sethostname xscf#0 scf0-hostname
<Example 2> Specify the domain name com for XSCFU#0.
XSCF> sethostname -d company.com

Sun Microsystems Sun SPARC Enterprise M5000 Specifications

General

Brand	Sun Microsystems
Model	Sun SPARC Enterprise M5000
Category	Server
Language	English