Chapter 4 Operation of the Server 4-13
Note – Only the domains that are able to be powered on are displayed.
4.4.2 System Power Off
â– Command operation
1. Use the showdomainstatus(8) command to check the power status of the
system.
2. Use the poweroff(8) command to turn off power to all domains.
XSCF> poweron -a
DomainIDs to power on:00,01,02,03
Continue? [y|n] :y
00 :Not powering on: The power supply has already been turned on.
01 :Powering on
02 :Powering on
03 :Powering on
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the
"showlogs power".
XSCF> showdomainstatus -a
DID Domain Status
00 Running
01 Running
02 Running
03 Running
To Next Page
Loading...
Need help?
General
