Sun Microsystems Sun SPARC Enterprise M5000 User Manual

4-8 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
■ Backplane (BP) information
Unit number, status, version, serial number, FRU number and each DDC
information
The displayed information on each DDC includes the unit number version,
serial number, and FRU number.
■ Clock unit information
Unit number, status, version, serial number, and FRU number
■ Operator panel information
Unit number, status, version, serial number and FRU number
■ Power supply unit information
Unit number, status, serial number, FRU number, power status, and voltage
■ Fan backplane information
Unit number, status, version, serial number, and FRU number
■ Fan unit information.
Unit number, status, serial number
Note – The configuration information might change based on model configuration
in M3000/M4000/M5000/M8000/M9000 servers.
Note – The External I/O Expansion Unit may be referred to as IOBOX in example
program output and the text in this manual.
Note – 8GB DIMM is supported in XCP1081 or later.
"Type" in the CPU/Memory board unit information is supported in XCP1090 or later
on M8000/M9000 servers.
4.2 Display Domain Information
This section describes methods for checking the configuration and status of a
domain.
Note – For details on domain management, configuration and each command, see
Chapter 2, the XSCF Reference Manual, or the Administration Guide.

Sun Microsystems Sun SPARC Enterprise M5000 Specifications

General

Brand	Sun Microsystems
Model	Sun SPARC Enterprise M5000
Category	Server
Language	English