Chapter 9 How to Use the XSCF Web 9-11
Displaying System Status
TABLE 9-3 lists the functions for displaying the status of the entire system. Select
[Status]-[System Status] in the Menu tree.
TABLE 9-4 lists the functions for displaying the status of a domain. Select
[Status]-[Domain Status] in the Menu tree.
TABLE 9-3 System Status Display
Function Remarks
Mode switch display Displays the mode switch status of the operator
panel.
This function is equivalent to the
showhardconf(8) command.
System time display This function is equivalent to the showdate(8)
command.
Failure component display This function is equivalent to the showstatus(8)
command.
Displaying temperature and humidity information This function is equivalent to the
showenvironment(8) command.
The humidity is displayed for the M8000/M9000
servers.
Displaying air flow information This function is equivalent to the
showenvironment(8) command.
The airflow information is displayed for the
M3000/M8000/M9000 servers.
Displaying temperature, voltage, power
consumption, and fan information
Displays the exhaust temperature, voltage value,
and fan speed of each component. Also, displays
the power consumption of server. The power
consumption is displayed for the M3000 server.
This function is equivalent to the
showenvironment(8) command.
To Next Page
Loading...
Need help?
General
