Chapter 9 How to Use the XSCF Web 9-21
TABLE 9-16 lists the functions for configuring XSCF mail. This page provides the
SMTP server settings. Select [Settings]-[SMTP] in the Menu tree.
TABLE 9-17 lists the functions for configuring XSCF mail. This page provides the
email report settings. Select [Settings]-[Email Reporting] in the Menu tree.
Request the archive and data deletion Request the log archive for the audit trail. Also
delete the audit trail in the secondary partition.
This function is equivalent to the setaudit(8)
command.
Audit policy display and setting Display and specify the policy, such as when an
audit trail becomes full, the local audit file usage
threshold (%) that triggers an alarm when reached,
the destination address for that alarm.
This function is equivalent to the setaudit(8)
command.
Audit event/class display and setting Display the audit events and the audit classes.
Also, Enable and disable the audit events and the
audit classes.
This function is equivalent to the setaudit(8)
command.
TABLE 9-16 Mail Configuration (SMTP)
Function Remarks
SMTP server display and configuration Displays SMTP server setting information. Sets the
host name and the port number of the SMTP
server.
These functions are equivalent to the showamtp(8)
and setsmtp(8) commands.
Authentication server display and configuration When you enable the Authentication, displays and
specifies the authentication mechanism and
authentication server.
These functions are equivalent to the showsmtp(8)
and setsmtp(8) commands.
Reply address server display and setting Displays and specifies the recipient address for
error mail.
These functions are equivalent to the showsmtp(8)
and setsmtp(8) commands.
TABLE 9-15 Audit Configuration (2 of 2)
Function Remarks
To Next Page
Loading...
