9-6 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
9.2.1 Prerequisites
Some settings are disabled in the initial settings of the XSCF Web. To use this
function, advance configuration is required as follows:
â– Create an XSCF user account.
â– Enable https at the https setting to use the XSCF Web.
â– Register the web server certificate at the https setting.
â– Specify mail notification (recommended for failure notification).
For details on the settings, see Chapter 2.
9.2.2 Supported Browsers
TABLE 9-2 lists the web browsers supported by the XSCF Web. To use functions in any
of the following web browsers, enable the appropriate settings.
The first firmware to support the newer entry-level server is the XCP 1080 firmware.
For specific information about minimum OS and firmware requirements, see the
latest version of the Product Notes (no earlier than the XCP 1080 edition) for your
server.
9.2.3 Functions to be Enabled on the Browser
The following functions are necessary for the browser.
1. Secure Socket Layer Protocol (SSL) Ver. 3,
Transport Layer Security (TLS) Ver. 1
2. JavaScriptâ„¢ enabled
3. Cookies enabled for session management
TABLE 9-2 Supported Browsers
Browser Version
Microsoft
®
Internet Explorer 6.0 and later
Firefox (Solaris 10) 2.0 and later
To Next Page
Loading...
Need help?
General
