Chapter 2 Setting Up XSCF 2-71
Enabling or Disabling Audit, Transferring a Log File, and Deleting
Audit Data
■ Command operation
1. Use the showaudit(8) command to display audit settings.
2. Use the setaudit(8) command to configure auditing.
<Example> Display all information on the current audit status in
the system.
XSCF> showaudit all
Auditing: enabled
Audit space used: 13713 (bytes)
Audit space free: 4180591 (bytes)
Records dropped: 0
Policy on full trail: count
User global policy: enabled
Mail:
Thresholds: 80% 100%
User policy:
Events:
AEV_AUDIT_START enabled
AEV_AUDIT_STOP enabled
:
<Example 1> Disable writing to the audit trail and transfer the log
file.
XSCF> setaudit disable
<Example 2> Enable writing to the audit trail.
XSCF> setaudit enable
Turns on writing of the audit records for the audit trail.
< Example 3> Request the log file transfer.
XSCF> setaudit archive
< Example 4> Delete the log data of the audit trail.
XSCF> setaudit delete
To Next Page
Loading...
