EasyManuals Logo

Sun Microsystems Sun SPARC Enterprise M5000 User Manual

Sun Microsystems Sun SPARC Enterprise M5000
398 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #132 background imageLoading...
Page #132 background image
2-80 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
TABLE 2-17 lists settings and the corresponding shell commands.
VACM Abbreviation for View-based Access Control Model. This view-based access control
model is defined by SNMPv3.
Group Users belonging to a VACM model. The group is defined in the access privilege of every
user in the group.
OID Abbreviation for Object Identifier. This is an object identification number. a numerical
address for an object in the MIB definition file, expressed with integers using a dot as the
delimiter.
View
(MIB View)
Method of referring to the MIB definition file. A view is a subtree of the MIB, which is
defined with OIDs and OID masks. An MIB access control view can be provided to a
group.
TABLE 2-17 SNMP Administration
Item Description Shell Command Remarks
Display SNMP
setting
information
Displays the SNMP agent setting
information and status.
showsnmp
System
management
information
Makes the following settings as management
information that is common to the v1,v2c,v3
agent protocol:
• Installation location of the agent system
• Mail address of the administrator
• Description of the agent system
• Port number of the agent (listening port
number)
setsnmp • The default agent port
number is 161. The
default values of other
port numbers are to be
defined.
• You can use up to 128
characters to specify the
mail address. If the
receiving address has a
restriction, check the
settings.
Enable/Disable
Agent
Enables/disables SNMP agent.
You can specify the name of the MIB module
as follows.
• SP-MIB (XSCF extension MIB)
• FM-MIB (Fault Management MIB)
• ALL (All the MIB modules in this list)
When you do not specify the name of the
MIB module, it activates the SNMP agent
with support for all MIB modules or stops
the SNMP agent.
setsnmp • The default is disabled.
• FM-MIB is the fault
management MIB, which
has a format compatible
with the Solaris OS. The
FM-MIB is provided for
users who are familiar
with the Solaris OS.
TABLE 2-16 SNMP Administration Terms (Continued)
Term Description

Table of Contents

Other manuals for Sun Microsystems Sun SPARC Enterprise M5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sun Microsystems Sun SPARC Enterprise M5000 and is the answer not in the manual?

Sun Microsystems Sun SPARC Enterprise M5000 Specifications

General IconGeneral
BrandSun Microsystems
ModelSun SPARC Enterprise M5000
CategoryServer
LanguageEnglish

Related product manuals