Sun Microsystems Sun SPARC Enterprise M5000 User Manual

Chapter 3 Connecting to the XSCF and the Server 3-7
1. Confirm that a serial cable is inserted into the serial connector on the front of
the XSCF Unit, and confirm that the PC and workstation to be used are
correctly connected.
2. Check whether the following are set on the terminal software.
Baud rate: 9600 bps, Data length: 8 bit, No parity, STOP bit: 1 bit,
No flow control, Delay: Except for 0

Sun Microsystems Sun SPARC Enterprise M5000 Specifications

General

Brand	Sun Microsystems
Model	Sun SPARC Enterprise M5000
Category	Server
Language	English