3-18 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
Using Two LAN Ports Selectively for Management and Maintenance
FIGURE 3-7 shows an example of a configuration where the two XSCF-LANs of one
XSCF Unit are used selectively for the system administrators and the FE. This
configuration does not make the XSCF-LAN redundant. The purpose is as follows:
■ One LAN is used for the system administrator.
■ The other LAN is used for the remote maintenance service only or by the FE.
To Next Page
Loading...
