C-4 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
Note – In the M3000/M4000/M5000/M8000/M9000 servers, information has been
added, such as power consumption and exhaust air. If you install a new server,
reinstall the XSCF extension MIB definition file to the SNMP manager. For specific
information about power consumption and exhaust air, see the latest version of the
Product Notes (no earlier than the XCP 1080 edition) for your server.
The list below explains the group summary of the extension MIB supported by the
XSCF.
1. scfInfo group
This group provides general information pertaining to the XSCF.
2. scfState group
This group provides overall status information known to the XSCF.
3. scfMonitorInfo group
This group provides environmental information for a variety of components
within the system.
4. scfSystemInfo group
This group provides general System information and LED states.
5. scfDomainInfo group
This group provides information specific to all Domains known to the XSCF.
6. scfXsbInfo group
This group provides information specific to all XSBs known to the XSCF.
7. scfLsbInfo group
This group provides information specific to all LSBs.
8. scfBoardInfo group
This group provides information pertaining to specific board components
within a System.
9. scfCpuInfo group
This group provides information for all CPU Modules/Cores within the
System.
10. scfMemoryInfo group
This group provides information for all Memory Modules within the System.
To Next Page
Loading...
Need help?
General
