24
** There are cord end terminals of two specifications (5 for each specification) used to con-
nect AC cables. Select appropriate terminals according to the cable cross-section area.
4.3 Inverter Storage
Proper storage is required if the inverter is not installed immediately.
• Store the inverter in the original packing case with the desiccant inside.
• The storage temperature must be always between -30℃ and +70℃, and the storage rel-
ative humidity must be always between 0 and 95 %, non-condensing.
• In case of stacking storage, the number of stacking layers should never exceed the limit
marked on the outer side of the packing case.
• The packing case should be upright.
• If the inverter has been stored more than half a year, the qualified personnel should thor-
oughly check and test it before installation.
4 Unpacking and Storage User Manual
To Next Page
Loading...
