EasyManua.ls Logo

Sungrow SH5.0RT - Product Description; System Introduction; Product Introduction

Sungrow SH5.0RT
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
2
Product Description
2.1 System Introduction
The inverter must only be operated with PV strings with class II protection in ac-
cordance with IEC 61730, application class A. It is not allowed for the positive
pole or the negative pole of the PV strings to be grounded. This can cause the
inverter to be destroyed.
Damages to the product due to a faulty or damaged PV installation are not cov-
ered by warranty.
Any use other than the one described in this document is not permitted.
For the TT utility grid, the N line voltage to ground must be 30 V or less.
The three-phase hybrid inverters are applicable to both on-grid and off-grid PV systems.
With the integrated Energy Management System (EMS), they can control and optimize the
energy flow so as to increase the self-consumption of the system.
2.2 Product Introduction
Model Description
The model description is as follows (take SH10RT as an example):
Appearance
The image shown here is for reference only. The actual product received may differ.

Table of Contents

Other manuals for Sungrow SH5.0RT

Related product manuals