25
5
Mechanical Mounting
Respect all local standards and requirements during mechanical installation.
5.1 Safety during Mounting
Make sure there is no electrical connection before installation.
In order to avoid electric shock or other injury, make sure that holes will not be
drilled over any electricity or plumbing installations.
Risk of injury due to improper handling!
• Always follow the instructions when moving and positioning the inverter.
• Improper operation may cause injuries or serious wounds.
In the case of poor ventilation, the system performance may compromise.
• Keep the heat sinks uncovered to ensure heat dissipation performance.
5.2 Location Requirements
Select an optimal mounting location for safe operation, long service life and expected
performance.
• The inverter with protection rating IP65 can be installed both indoors and outdoors.
• Install the inverter at a place convenient for electrical connection, operation, and
maintenance.
To Next Page
Loading...
