42
6.5.3 Installing the AC Connector
High voltage may be present in inverter!
Ensure all cables are voltage-free before electrical connection.
Do not connect the AC circuit breaker until all inverter electrical connections are
completed.
step 1 Disconnect the AC circuit breaker and secure it against reconnection.
step 2 Remove the waterproof lid from the GRID terminal.
step 3 Insert the AC connector into the GRID terminal on the bottom of the inverter until there is an
audible sound.
step 4 (Optional) Insert the block into AC connector, as shown in the figure below.
6 Electrical Connection User Manual
To Next Page
Loading...
