SunSynk 8kW User Manual

Website: www.sunsynk.com E-mail: sales@globaltech-china.com
21
3.2.1. BMS
Most lithium batteries have a battery management system (BMS).
Without the use of a BMS, it is very difficult for the inverter to know the State of Charge (SOC). Therefore,
the BMS will provide the inverter with the SOC and the maximum charge and discharge parameters that are
allowed for that particular battery.
When connecting a lithium battery, you must hook up a communication cable between the inverter and
the battery. Every battery has different settings, so you need to refer to the manufacturer user manual and
also check on our user manual to see if that particular battery can be used
The battery may look like this:
Depending upon the type of battery you are using, it may require either car or RS232 communication. The
Sunsynk inverter supports both methods of communication.
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com
Sunsynk.com
Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com

SunSynk 8kW Specifications

General

Rated Power	8kW
Max. DC Voltage	500V
Number of MPPTs	2
Max Output Current	35A
Max Efficiency	97.6%
Battery Voltage	48V
Max Charging Current	190A
Max Discharging Current	190A
Frequency	50/60Hz
Max PV Input	10400W
Operating Temperature	-25°C to 60°C
Protection Rating	IP65
Max DC Input Voltage	500V
Max Input Current	22A
Nominal AC Voltage	230V
Communication	RS485
Protection	Overload Protection
Cooling	Fan