Name: SunSynk 8kW
Brand: SunSynk
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Website: www.sunsynk.com E-mail: sales@globaltech-china.com

It is possible to build a much larger system using many inverters, however, you need to split the loads,

which is a good idea. A large system can have a common battery bank, so the solar array charges the same

battery.

Something to remember is that the inverters go through very stringent tests at our factory. They are tested

for everything, as well as long soak tests. When the inverter leaves the factory, it is working perfectly.

Therefore, any faults that appear are probably caused by installation issues.

To check fault codes, click on the ‘Fault Codes’ icon on the settings menu.

Figure 57 - Fault code pages.

The default diagnostic is here to help you find problems with the system. It is very useful in localising an

issue.

F13 - Working mode change

If you are making a change while the system is running, like parallel or disabling the parallel operation, it

may cause the system to crash. This is actually a very dangerous problem and can easily damage the inverter.

If you are making such changes, you need to isolate the inverter from the load. When the battery mode was

changed to 'No battery' mode, it will report F13.

If you get an F13 fault, the best solution is normally to reset the system.

F18 AC - over current fault of the hardware

This error is an overload on the 'Load' terminal, and it is also quite a common fault. This fault is possibly

caused by a heavy surge current from air-conditioners or by a battery issue. Generally, it is caused by a rush

current to the load due to many loads switching on at the same time.

Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com

Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com

Sunsynk.com

Questions and Answers:

Need help?

Do you have a question about the SunSynk 8kW and is the answer not in the manual?

SunSynk 8kW Specifications

General